FAQs
What types of anti-fouling systems can I use for my ISFET-based pH sensor?
A vented copper cover over the sensor can provide some protection against bio-fouling. There is a copper anti-foul guard available for standalone SeaFETs that covers the sensing surfaces.nnIf you use a SeapHOx system, the conductivity cell on the SBE 37-SMP comes...
What research is the temperature / salinity correction for SUNA nitrate data based on? Does this correction only work in natural seawater?
The temperature and salinity correction for the SUNA can be traced to the experiment outlined in Sakamoto et al. 2009, which is the T/S correction our UCI-based SUNA software uses in post-processing only.nnAbsorption of UV light in seawater is dominated by dissolved...
How can I copy the setup of my Sea-Bird software onto another computer?
A setup file is used by Seasave V7, and by each module in SBE Data Processing, to remember the way you had the program set up. You can save the file to a desired filename and location, and then use it when you run the software the next time, to ensure that the...
Can I brush-clean and replatinize the conductivity cell myself? How often should this be done?
Brush-cleaning and replatinizing should be performed at Sea-Bird. We cannot extend warranty coverage if you perform this work yourself. The brush-cleaning and replatinizing process requires specialized equipment and chemicals, and the disassembly of the sensor. If...
I sent my conductivity sensor to Sea-Bird for calibration, and you also performed a Cleaning and Replatinizing (C &P). You sent the instrument back with 2 sets of calibration data. What does this mean?
The post-cruise calibration contains important information for drift calculations. The post-cruise calibration is performed on the cell as we received it from you, and is an indicator of how much the sensor has drifted in the field. Information from the...
What are Configuration Sheets, and where can I find them for my instrument?
Configuration Sheets detail instrument communication settings, system configuration (auxiliary sensors, which channels are set up for which sensors), and sensor calibration coefficients. Configuration sheets are provided with the instrument, in both paper form (may be...
What is Sea-Bird’s policy on upgrading instruments?
It is our policy to update firmware in instruments while they are here for calibration at no cost to the customer, but it is not our policy to routinely upgrade circuit cards. On some very old units that are being upgraded to support more external...
What do I need to send to Sea-Bird for calibration of my SBE 9plus, 25, or 25plus?
For calibration of the temperature and conductivity sensors, only the sensor modules need to be sent to Sea-Bird. It is not necessary to send the CTD main housing. See Shipping SBE 9plus, 25, and 25plus Temperature and Conductivity Sensors for details.It is...
Does Sea-Bird have any calibration/service centers outside of the United States?
Sea-Bird opened a calibration/service center in Kempten, Germany in 2011, providing duty-free servicing for EU customers. The dedicated technical support staff and calibration technicians were extensively trained by Sea-Bird experts. Calibration cross-referencing...
Featured Posts
Ocean Sciences Meeting 2024
We hope to see you at #OSM24 We are excited to return to Ocean Sciences Meeting 2024 in New Orleans, Louisiana from February 18-23 at booth number #527. Overview The Ocean Sciences Meeting 2024 is co-sponsored by the American Geophysical Union, the Association for the...
November 2023 Newsletter
Come See Us at AGU in San Francisco! Sea-Bird Scientific is excited to exhibit at the upcoming AGU Fall Meeting taking place in San Francisco, California, from December 11 – 15, 2023. Please come see members of our team at booth #604 to get answers to your...
Seattle Ocean Science Happy Hour
Please join us alongside BioSonics, Marine Technology Society, and Sequoia Scientific as we host a Seattle Ocean Science & Technology Conference Happy Hour! Date: Wednesday, November 29, 2023 from 5:30 - 8:30pm Location: National Nordic Museum | 2655 NW Market...
Science and Technology
Platform